BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Hutchinson Public Library - ECPv6.15.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Hutchinson Public Library
X-ORIGINAL-URL:https://www.hutchpl.org
X-WR-CALDESC:Events for Hutchinson Public Library
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250809T103000
DTEND;TZID=America/Chicago:20250809T120000
DTSTAMP:20260513T095727
CREATED:20250728T175421Z
LAST-MODIFIED:20250728T175421Z
UID:10001017-1754735400-1754740800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. Please note: Student library cards are not valid for Makerspace workshops.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nYoung children must be able to understand written and verbal instructions unaided\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-41/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250807T160000
DTEND;TZID=America/Chicago:20250807T173000
DTSTAMP:20260513T095727
CREATED:20250728T174901Z
LAST-MODIFIED:20250728T174901Z
UID:10001016-1754582400-1754587800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. Please note: Student library cards are not valid for Makerspace workshops.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nYoung children must be able to understand written and verbal instructions unaided\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-40/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250801T103000
DTEND;TZID=America/Chicago:20250801T120000
DTSTAMP:20260513T095727
CREATED:20250728T174617Z
LAST-MODIFIED:20250728T174617Z
UID:10001015-1754044200-1754049600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. Please note: Student library cards are not valid for Makerspace workshops.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nYoung children must be able to understand written and verbal instructions unaided\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-39/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250729T180000
DTEND;TZID=America/Chicago:20250729T193000
DTSTAMP:20260513T095727
CREATED:20250728T172256Z
LAST-MODIFIED:20250728T173216Z
UID:10001014-1753812000-1753817400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. Please note: Student library cards are not valid for Makerspace workshops.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nYoung children must be able to understand written and verbal instructions unaided\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-38/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250725T103000
DTEND;TZID=America/Chicago:20250725T120000
DTSTAMP:20260513T095727
CREATED:20250701T110028Z
LAST-MODIFIED:20250718T221953Z
UID:10001010-1753439400-1753444800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-37/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250722T180000
DTEND;TZID=America/Chicago:20250722T193000
DTSTAMP:20260513T095727
CREATED:20250701T110001Z
LAST-MODIFIED:20250630T184410Z
UID:10001009-1753207200-1753212600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-36/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250719T103000
DTEND;TZID=America/Chicago:20250719T120000
DTSTAMP:20260513T095727
CREATED:20250701T110035Z
LAST-MODIFIED:20250718T222633Z
UID:10001008-1752921000-1752926400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-35/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
ORGANIZER;CN="Makerspace":MAILTO:makerspace@hutchpl.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250717T160000
DTEND;TZID=America/Chicago:20250717T173000
DTSTAMP:20260513T095727
CREATED:20250701T110019Z
LAST-MODIFIED:20250630T183113Z
UID:10001007-1752768000-1752773400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-34/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250711T103000
DTEND;TZID=America/Chicago:20250711T120000
DTSTAMP:20260513T095727
CREATED:20250701T110020Z
LAST-MODIFIED:20250630T182915Z
UID:10001006-1752229800-1752235200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-33/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250708T180000
DTEND;TZID=America/Chicago:20250708T193000
DTSTAMP:20260513T095727
CREATED:20250701T110058Z
LAST-MODIFIED:20250630T182644Z
UID:10001005-1751997600-1752003000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-32/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250705T103000
DTEND;TZID=America/Chicago:20250705T120000
DTSTAMP:20260513T095727
CREATED:20250701T110027Z
LAST-MODIFIED:20250630T182039Z
UID:10001004-1751711400-1751716800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-31/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250703T160000
DTEND;TZID=America/Chicago:20250703T173000
DTSTAMP:20260513T095727
CREATED:20250701T110027Z
LAST-MODIFIED:20250630T181247Z
UID:10001003-1751558400-1751563800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-30/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250628T103000
DTEND;TZID=America/Chicago:20250628T120000
DTSTAMP:20260513T095727
CREATED:20250527T233402Z
LAST-MODIFIED:20250527T233402Z
UID:10000913-1751106600-1751112000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-25/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250624T180000
DTEND;TZID=America/Chicago:20250624T193000
DTSTAMP:20260513T095727
CREATED:20250530T004629Z
LAST-MODIFIED:20250530T004629Z
UID:10000958-1750788000-1750793400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-29/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250621T103000
DTEND;TZID=America/Chicago:20250621T120000
DTSTAMP:20260513T095727
CREATED:20250530T004514Z
LAST-MODIFIED:20250530T004514Z
UID:10000957-1750501800-1750507200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-28/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250620T160000
DTEND;TZID=America/Chicago:20250620T173000
DTSTAMP:20260513T095727
CREATED:20250527T232806Z
LAST-MODIFIED:20250527T232922Z
UID:10000912-1750435200-1750440600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-24/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250614T103000
DTEND;TZID=America/Chicago:20250614T120000
DTSTAMP:20260513T095727
CREATED:20250527T232517Z
LAST-MODIFIED:20250527T234118Z
UID:10000911-1749897000-1749902400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-23/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250612T163000
DTEND;TZID=America/Chicago:20250612T180000
DTSTAMP:20260513T095727
CREATED:20250530T004441Z
LAST-MODIFIED:20250530T004441Z
UID:10000956-1749745800-1749751200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-27/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250607T103000
DTEND;TZID=America/Chicago:20250607T120000
DTSTAMP:20260513T095727
CREATED:20250530T004246Z
LAST-MODIFIED:20250530T004246Z
UID:10000955-1749292200-1749297600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-26/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250604T160000
DTEND;TZID=America/Chicago:20250604T173000
DTSTAMP:20260513T095727
CREATED:20250527T232212Z
LAST-MODIFIED:20250527T234055Z
UID:10000910-1749052800-1749058200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-22/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250529T180000
DTEND;TZID=America/Chicago:20250529T193000
DTSTAMP:20260513T095727
CREATED:20250428T223934Z
LAST-MODIFIED:20250428T223934Z
UID:10000897-1748541600-1748547000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-21/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250523T160000
DTEND;TZID=America/Chicago:20250523T173000
DTSTAMP:20260513T095727
CREATED:20250428T223723Z
LAST-MODIFIED:20250428T223723Z
UID:10000896-1748016000-1748021400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-20/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250515T180000
DTEND;TZID=America/Chicago:20250515T193000
DTSTAMP:20260513T095727
CREATED:20250428T223553Z
LAST-MODIFIED:20250428T223553Z
UID:10000895-1747332000-1747337400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-19/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250510T103000
DTEND;TZID=America/Chicago:20250510T120000
DTSTAMP:20260513T095727
CREATED:20250428T223314Z
LAST-MODIFIED:20250428T223314Z
UID:10000894-1746873000-1746878400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-18/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250503T103000
DTEND;TZID=America/Chicago:20250503T120000
DTSTAMP:20260513T095727
CREATED:20250428T223201Z
LAST-MODIFIED:20250428T223201Z
UID:10000893-1746268200-1746273600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-17/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250426T103000
DTEND;TZID=America/Chicago:20250426T120000
DTSTAMP:20260513T095727
CREATED:20250331T220516Z
LAST-MODIFIED:20250402T151909Z
UID:10000878-1745663400-1745668800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-16/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250418T160000
DTEND;TZID=America/Chicago:20250418T173000
DTSTAMP:20260513T095727
CREATED:20250331T220338Z
LAST-MODIFIED:20250402T151843Z
UID:10000877-1744992000-1744997400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-15/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250407T160000
DTEND;TZID=America/Chicago:20250407T173000
DTSTAMP:20260513T095727
CREATED:20250331T215920Z
LAST-MODIFIED:20250402T151822Z
UID:10000876-1744041600-1744047000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-14/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250404T160000
DTEND;TZID=America/Chicago:20250404T173000
DTSTAMP:20260513T095727
CREATED:20250331T215406Z
LAST-MODIFIED:20250402T151745Z
UID:10000873-1743782400-1743787800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-13/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250328T160000
DTEND;TZID=America/Chicago:20250328T173000
DTSTAMP:20260513T095727
CREATED:20250303T211447Z
LAST-MODIFIED:20250303T211447Z
UID:10000224-1743177600-1743183000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-12/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
END:VCALENDAR