BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Hutchinson Public Library - ECPv6.16.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Hutchinson Public Library
X-ORIGINAL-URL:https://www.hutchpl.org
X-WR-CALDESC:Events for Hutchinson Public Library
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250621T103000
DTEND;TZID=America/Chicago:20250621T120000
DTSTAMP:20260621T200851
CREATED:20250530T004514Z
LAST-MODIFIED:20250530T004514Z
UID:10000957-1750501800-1750507200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-28/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250620T160000
DTEND;TZID=America/Chicago:20250620T173000
DTSTAMP:20260621T200851
CREATED:20250527T232806Z
LAST-MODIFIED:20250527T232922Z
UID:10000912-1750435200-1750440600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-24/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250614T103000
DTEND;TZID=America/Chicago:20250614T120000
DTSTAMP:20260621T200851
CREATED:20250527T232517Z
LAST-MODIFIED:20250527T234118Z
UID:10000911-1749897000-1749902400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-23/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250613T150000
DTEND;TZID=America/Chicago:20250613T170000
DTSTAMP:20260621T200851
CREATED:20250530T220310Z
LAST-MODIFIED:20250530T220342Z
UID:10000959-1749826800-1749834000@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-9/
LOCATION:KS
CATEGORIES:Adults,Makerspace,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250613T150000
DTEND;TZID=America/Chicago:20250613T160000
DTSTAMP:20260621T200851
CREATED:20250513T150457Z
LAST-MODIFIED:20250513T150457Z
UID:10000900-1749826800-1749830400@www.hutchpl.org
SUMMARY:Anything But A Paintbrush
DESCRIPTION:7th-12th graders\, channel your inner artist and create a colorful masterpiece. The only rule: no paintbrushes allowed! We will provide an assortment of unconventional painting tools for you to use for your project\, as well as canvases and snacks for you to enjoy. Registration is recommended but not required for this event. \nRegister Here
URL:https://www.hutchpl.org/event/anything-but-a-paintbrush/
LOCATION:KS
CATEGORIES:Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/05/ABAP-small-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250612T163000
DTEND;TZID=America/Chicago:20250612T180000
DTSTAMP:20260621T200851
CREATED:20250530T004441Z
LAST-MODIFIED:20250530T004441Z
UID:10000956-1749745800-1749751200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-27/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250607T103000
DTEND;TZID=America/Chicago:20250607T120000
DTSTAMP:20260621T200851
CREATED:20250530T004246Z
LAST-MODIFIED:20250530T004246Z
UID:10000955-1749292200-1749297600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-26/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250604T160000
DTEND;TZID=America/Chicago:20250604T173000
DTSTAMP:20260621T200851
CREATED:20250527T232212Z
LAST-MODIFIED:20250527T234055Z
UID:10000910-1749052800-1749058200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-22/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250530T190000
DTEND;TZID=America/Chicago:20250530T210000
DTSTAMP:20260621T200851
CREATED:20250422T190750Z
LAST-MODIFIED:20250422T190750Z
UID:10000884-1748631600-1748638800@www.hutchpl.org
SUMMARY:Mini Golf in the Library
DESCRIPTION:Kick off your summer with us and play mini golf in the library! After the library *closes to the public\, we will be celebrating summer with a LED mini golf course\, snacks\, and other fun activities. Bring your friends and compete as a group\, form a team when you arrive\, or play solo. No matter what\, it will be a great time! Registration is required to participate in this event: https://forms.gle/4dQY6VrKRQB8QX1J8  \nThis program is open to teens entering grades 7-12 in the 2025-26 school year and recent graduates.
URL:https://www.hutchpl.org/event/mini-golf-in-the-library/
LOCATION:KS
CATEGORIES:Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/04/YA-Mini-Golf-small.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250530T150000
DTEND;TZID=America/Chicago:20250530T170000
DTSTAMP:20260621T200851
CREATED:20250503T225130Z
LAST-MODIFIED:20250503T225130Z
UID:10000899-1748617200-1748624400@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-8/
LOCATION:KS
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250529T180000
DTEND;TZID=America/Chicago:20250529T193000
DTSTAMP:20260621T200851
CREATED:20250428T223934Z
LAST-MODIFIED:20250428T223934Z
UID:10000897-1748541600-1748547000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-21/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250523T160000
DTEND;TZID=America/Chicago:20250523T173000
DTSTAMP:20260621T200851
CREATED:20250428T223723Z
LAST-MODIFIED:20250428T223723Z
UID:10000896-1748016000-1748021400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-20/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250515T180000
DTEND;TZID=America/Chicago:20250515T193000
DTSTAMP:20260621T200851
CREATED:20250428T223553Z
LAST-MODIFIED:20250428T223553Z
UID:10000895-1747332000-1747337400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-19/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250510T103000
DTEND;TZID=America/Chicago:20250510T120000
DTSTAMP:20260621T200851
CREATED:20250428T223314Z
LAST-MODIFIED:20250428T223314Z
UID:10000894-1746873000-1746878400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-18/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250503T103000
DTEND;TZID=America/Chicago:20250503T120000
DTSTAMP:20260621T200851
CREATED:20250428T223201Z
LAST-MODIFIED:20250428T223201Z
UID:10000893-1746268200-1746273600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-17/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250502T150000
DTEND;TZID=America/Chicago:20250502T170000
DTSTAMP:20260621T200851
CREATED:20250503T225054Z
LAST-MODIFIED:20250503T225054Z
UID:10000898-1746198000-1746205200@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-7/
LOCATION:KS
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250426T103000
DTEND;TZID=America/Chicago:20250426T120000
DTSTAMP:20260621T200851
CREATED:20250331T220516Z
LAST-MODIFIED:20250402T151909Z
UID:10000878-1745663400-1745668800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-16/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250418T160000
DTEND;TZID=America/Chicago:20250418T173000
DTSTAMP:20260621T200851
CREATED:20250331T220338Z
LAST-MODIFIED:20250402T151843Z
UID:10000877-1744992000-1744997400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-15/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250407T160000
DTEND;TZID=America/Chicago:20250407T173000
DTSTAMP:20260621T200851
CREATED:20250331T215920Z
LAST-MODIFIED:20250402T151822Z
UID:10000876-1744041600-1744047000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-14/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250404T160000
DTEND;TZID=America/Chicago:20250404T173000
DTSTAMP:20260621T200851
CREATED:20250331T215406Z
LAST-MODIFIED:20250402T151745Z
UID:10000873-1743782400-1743787800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-13/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250328T160000
DTEND;TZID=America/Chicago:20250328T173000
DTSTAMP:20260621T200851
CREATED:20250303T211447Z
LAST-MODIFIED:20250303T211447Z
UID:10000224-1743177600-1743183000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-12/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250322T100000
DTEND;TZID=America/Chicago:20250322T113000
DTSTAMP:20260621T200851
CREATED:20250303T211338Z
LAST-MODIFIED:20250303T211338Z
UID:10000223-1742637600-1742643000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-11/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250320T180000
DTEND;TZID=America/Chicago:20250320T193000
DTSTAMP:20260621T200851
CREATED:20250226T230520Z
LAST-MODIFIED:20250226T230520Z
UID:10000219-1742493600-1742499000@www.hutchpl.org
SUMMARY:Teen Trivia Night
DESCRIPTION:7th-12th graders\, join us at the library for a night of trivia\, food\, and fun! Test your knowledge on various topics\, from pop culture to history. You can come as a team or join one upon arrival. Prizes will be awarded to the winning team of each round! Trivia Night will be held in HPL’s Meeting Room 1. Registration is not required.
URL:https://www.hutchpl.org/event/teen-trivia-night/
LOCATION:KS
CATEGORIES:Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Teen-Trivia-Night-IG-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250313T160000
DTEND;TZID=America/Chicago:20250313T173000
DTSTAMP:20260621T200851
CREATED:20250303T211028Z
LAST-MODIFIED:20250303T211028Z
UID:10000222-1741881600-1741887000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-10/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250305T160000
DTEND;TZID=America/Chicago:20250305T173000
DTSTAMP:20260621T200851
CREATED:20250303T210842Z
LAST-MODIFIED:20250303T211757Z
UID:10000221-1741190400-1741195800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-9/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250228T160000
DTEND;TZID=America/Chicago:20250228T173000
DTSTAMP:20260621T200851
CREATED:20250201T222428Z
LAST-MODIFIED:20250201T222428Z
UID:10000215-1740758400-1740763800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-8/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250222T140000
DTEND;TZID=America/Chicago:20250222T180000
DTSTAMP:20260621T200851
CREATED:20250204T223235Z
LAST-MODIFIED:20250204T223235Z
UID:10000218-1740232800-1740247200@www.hutchpl.org
SUMMARY:Tech-Share Learning Event
DESCRIPTION:Visit our learning event in Meeting Room #2 if you’d like to improve your technology skills! Our partner\, Tech-Share\, will be available to help you with your device\, provide information and general help\, and guide you on your path to technology proficiency. \nBring your own equipment or get help on devices Tech-Share will have available for hands-on learning. 
URL:https://www.hutchpl.org/event/tech-share-learning-event/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2024/08/Copy-of-White-And-Blue-Modern-Computer-Course-Facebook-Post.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250222T140000
DTEND;TZID=America/Chicago:20250222T160000
DTSTAMP:20260621T200851
CREATED:20250204T165600Z
LAST-MODIFIED:20250204T165600Z
UID:10000217-1740232800-1740240000@www.hutchpl.org
SUMMARY:Teen Murder Mystery Party
DESCRIPTION:There has been a murder at the International CSI Conference\, and everyone is a suspect. Get into character and gather clues from other players to crack the case before they strike again!  \nThis event is open to 7th-12th graders\, and registration is required by by February 15th or until spots fill. \nRegister Here
URL:https://www.hutchpl.org/event/teen-murder-mystery-party/
LOCATION:KS
CATEGORIES:Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/02/MMP.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250221T150000
DTEND;TZID=America/Chicago:20250221T170000
DTSTAMP:20260621T200851
CREATED:20250128T210853Z
LAST-MODIFIED:20250128T210853Z
UID:10000210-1740150000-1740157200@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Meeting Room #2.
URL:https://www.hutchpl.org/event/creative-writing-corner-4/
LOCATION:KS
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250219T180000
DTEND;TZID=America/Chicago:20250219T193000
DTSTAMP:20260621T200851
CREATED:20250201T221416Z
LAST-MODIFIED:20250201T221416Z
UID:10000214-1739988000-1739993400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:This workshop will cover the necessary information to perform basic 3D printing jobs. Successfully completing it makes allows you to use our 3D printing equipment\, and you will make a small 3D print at no cost.\n\n  \n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.
URL:https://www.hutchpl.org/event/3d-printing-certification-7/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/01/3D-Printing-workshop-3-un3z0D.tmp_.jpg
END:VEVENT
END:VCALENDAR