BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Hutchinson Public Library - ECPv6.15.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Hutchinson Public Library
X-ORIGINAL-URL:https://www.hutchpl.org
X-WR-CALDESC:Events for Hutchinson Public Library
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20240101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250404T160000
DTEND;TZID=America/Chicago:20250404T173000
DTSTAMP:20260503T042748
CREATED:20250331T215406Z
LAST-MODIFIED:20250402T151745Z
UID:10000873-1743782400-1743787800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-13/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250407T160000
DTEND;TZID=America/Chicago:20250407T173000
DTSTAMP:20260503T042748
CREATED:20250331T215920Z
LAST-MODIFIED:20250402T151822Z
UID:10000876-1744041600-1744047000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-14/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250408T180000
DTEND;TZID=America/Chicago:20250408T190000
DTSTAMP:20260503T042748
CREATED:20250312T163112Z
LAST-MODIFIED:20250312T163112Z
UID:10000813-1744135200-1744138800@www.hutchpl.org
SUMMARY:For the Record - Books + Music Club
DESCRIPTION:For the Record is a place for music lovers to gather and share their love of both reading about and listening to music. Join us for a monthly meetup on the second Tuesday of the month at 6:00PM. We dive into the stories behind iconic musicians and albums\, while sharing our favorite tracks and newest record finds. We read the 33 1/3 series. These are short books\, each about a different musician and album. We explore a new one each month with a discussion about the book\, album and the music that moves us. Whether you are a vinyl enthusiast or just passionate about discovering new sounds\, For the Record offers a fun and welcoming space to connect. \n  \nWe meet every month except for September. \nVisit our Adults page to see what we are reading this month.  Books are available for check out at the Public Service desk.
URL:https://www.hutchpl.org/event/for-the-record-books-music-club-24/2025-04-08/
LOCATION:KS
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/For-the-Record-Event-Cover-Instagram-Post-xvgJYu.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20250410
DTEND;VALUE=DATE:20250411
DTSTAMP:20260503T042748
CREATED:20250117T172352Z
LAST-MODIFIED:20250306T223741Z
UID:10000208-1744243200-1744329599@www.hutchpl.org
SUMMARY:A Library for All: Treasures of the Library of Congress
DESCRIPTION: \nThe Hutchinson Public Library is honored to collaborate with the Library of Congress\, bringing access to its renowned digital collections directly to you—no trip to Washington\, D.C. necessary! On February 18\, join us for an exciting one-day event where you’ll have the unique opportunity to connect with Library of Congress professionals and learn from experts in a variety of research topics. These sessions will empower you to trace your family’s rich connection to history on a grand scale. \nWorkshops will run from 10:30 AM to 7:30 PM at the Hutchinson Public Library. Don’t miss this extraordinary chance to engage with history like never before! \n  \nWorkshop Schedule: \n  \n\n10:30AM – Historical Newspapers from the Library of Congress\n11:30AM – Genealogy Resources from LOC.gov\n12:30PM – The Veteran’s History Project\n1:30PM – By the People Crowdsourcing at the Library of Congress\n2:30PM – The Kansas Talking Book Program & the Kansas Center for the Book\n3:30PM – Creative Works from the New Deal\n4:30PM – Transportation Resources at LOC.gov \n5:30PM – Genealogy Resources from LOC.gov\n6:30PM – Historical Newspapers from the Library of Congress
URL:https://www.hutchpl.org/event/a-library-for-all-treasures-of-the-library-of-congress/
LOCATION:KS
CATEGORIES:Adults
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/A-Library-for-All-Instagram-Post-1-2.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250416T180000
DTEND;TZID=UTC:20250416T190000
DTSTAMP:20260503T042748
CREATED:20250108T224731Z
LAST-MODIFIED:20250108T224731Z
UID:10000047-1744826400-1744830000@www.hutchpl.org
SUMMARY:Salt City Readers
DESCRIPTION:Let’s talk about books! We explore a variety of fiction genres each month! \nSalt City Readers meets every third Wednesday each month. \nCheck out the books at the Public Service Desk or on Cloud Library!  
URL:https://www.hutchpl.org/event/salt-city-readers-4/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Salt-City-Readers-Instagram-Post-vmKnTx.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250417T180000
DTEND;TZID=UTC:20250417T193000
DTSTAMP:20260503T042748
CREATED:20250108T224735Z
LAST-MODIFIED:20250306T223535Z
UID:10000048-1744912800-1744918200@www.hutchpl.org
SUMMARY:Art Talk with HCC
DESCRIPTION:Join us in Meeting Room 1 to learn about art topics presented by HCC students! 
URL:https://www.hutchpl.org/event/art-talk-with-hcc-3/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Art-Talk-with-HCC-2-QegaFQ.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250418T160000
DTEND;TZID=America/Chicago:20250418T173000
DTSTAMP:20260503T042748
CREATED:20250331T220338Z
LAST-MODIFIED:20250402T151843Z
UID:10000877-1744992000-1744997400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-15/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250422T180000
DTEND;TZID=UTC:20250422T190000
DTSTAMP:20260503T042748
CREATED:20250108T224741Z
LAST-MODIFIED:20250108T224741Z
UID:10000049-1745344800-1745348400@www.hutchpl.org
SUMMARY:Mystery Mavens
DESCRIPTION:6:00 pm\nConference Room #2\nMystery Mavens meet on the fourth Tuesday of every month. If you are interested in obtaining a copy of this month’s book and participating in a discussion\, please contact Steve Westfahl (steve.w@hutchpl.org) or call 620-663-5441.
URL:https://www.hutchpl.org/event/mystery-mavens-4/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Mystery1-3-JbMoK0.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250424T180000
DTEND;TZID=UTC:20250424T193000
DTSTAMP:20260503T042748
CREATED:20250108T224754Z
LAST-MODIFIED:20250402T214151Z
UID:10000050-1745517600-1745523000@www.hutchpl.org
SUMMARY:Humanities Kansas TALK Series – O’ Pioneers! With Dennis Etzel Jr.
DESCRIPTION:Stretching from Texas north into Canada\, the Great Plains region has generated its share of myths and stereotypes\, from the hardy pioneer farmer and the vanishing Indian to the Dust Bowl refugee.  It has also produced some of our finest writers and a rich literary tradition.  In this series\, readers will explore the historical and mythical legacies of the Plains and how they continue to shape perceptions of life in Kansas. \n\n The series continues with “O Pioneers!” by Willa Cather on Thursday\, April 24 at 6:00PM\, \n\n The discussion will be led by Dennis Etzel Jr. \n\n Dennis Etzel Jr. teaches English at Washburn University. He received his M.F.A. in Creative Writing from the University of Kansas. Dennis has two chapbooks\, The Sum of Two Mothers and My Graphic Novel and his work has been published in numerous publications and journals. In 2022\, he was awarded the John Doyle Klier Residency for the Writers Colony at Dairy Hollow\, Eureka Springs\, Arkansas. \n\n Books are available for check out at the Public Service Desk. Discussions are open to the public\, even if you haven’t read the book! Join the Conversation!
URL:https://www.hutchpl.org/event/humanities-kansas-talk-series-o-pioneers-with-dennis-etzel/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Book Discussion,For Everyone
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Humanities-Kansas-TALK-Series-Great-Plains-Spirit-2-tj3VlX.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250426T103000
DTEND;TZID=America/Chicago:20250426T120000
DTSTAMP:20260503T042748
CREATED:20250331T220516Z
LAST-MODIFIED:20250402T151909Z
UID:10000878-1745663400-1745668800@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-16/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250429T173000
DTEND;TZID=America/Chicago:20250429T193000
DTSTAMP:20260503T042748
CREATED:20250311T193821Z
LAST-MODIFIED:20250311T194017Z
UID:10000226-1745947800-1745955000@www.hutchpl.org
SUMMARY:Pocket Paintings
DESCRIPTION:Looking to explore painting but struggling with limited time and space? You’re not alone! Many busy adults find it hard to carve out time for creativity\, but what if we made room for play? \nAs adults\, we still need to explore and grow creatively\, and mini-paintings are the perfect way to do that. They’re small\, simple\, and easy to create in limited space with minimal supplies. \nIn this workshop\, we’ll guide you in making tiny masterpieces in under two hours\, helping you relax\, de-stress\, and enjoy the creative process. Plus\, you’ll connect with others and discover resources in our library’s art collection to keep your creativity flowing long after the workshop ends! \nRegistration is open! There are two dates to choose from\, please register for only one date. The workshop will be the same on both dates. \n  \nRegister Here: https://docs.google.com/forms/d/e/1FAIpQLSf3VnoPRgzHZ_sJyl3ITjHYpn_NVSX0TAqVoAwj7nRXuFcPRQ/viewform
URL:https://www.hutchpl.org/event/pocket-paintings/2025-04-29/
LOCATION:KS
CATEGORIES:Adults
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/03/Copy-of-Pocket-Paintings-Spring-2025.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250502T150000
DTEND;TZID=America/Chicago:20250502T170000
DTSTAMP:20260503T042748
CREATED:20250503T225054Z
LAST-MODIFIED:20250503T225054Z
UID:10000898-1746198000-1746205200@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-7/
LOCATION:KS
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250503T103000
DTEND;TZID=America/Chicago:20250503T120000
DTSTAMP:20260503T042748
CREATED:20250428T223201Z
LAST-MODIFIED:20250428T223201Z
UID:10000893-1746268200-1746273600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-17/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250506T173000
DTEND;TZID=America/Chicago:20250506T193000
DTSTAMP:20260503T042748
CREATED:20250311T193821Z
LAST-MODIFIED:20250311T194017Z
UID:10000227-1746552600-1746559800@www.hutchpl.org
SUMMARY:Pocket Paintings
DESCRIPTION:Looking to explore painting but struggling with limited time and space? You’re not alone! Many busy adults find it hard to carve out time for creativity\, but what if we made room for play? \nAs adults\, we still need to explore and grow creatively\, and mini-paintings are the perfect way to do that. They’re small\, simple\, and easy to create in limited space with minimal supplies. \nIn this workshop\, we’ll guide you in making tiny masterpieces in under two hours\, helping you relax\, de-stress\, and enjoy the creative process. Plus\, you’ll connect with others and discover resources in our library’s art collection to keep your creativity flowing long after the workshop ends! \nRegistration is open! There are two dates to choose from\, please register for only one date. The workshop will be the same on both dates. \n  \nRegister Here: https://docs.google.com/forms/d/e/1FAIpQLSf3VnoPRgzHZ_sJyl3ITjHYpn_NVSX0TAqVoAwj7nRXuFcPRQ/viewform
URL:https://www.hutchpl.org/event/pocket-paintings/2025-05-06/
LOCATION:KS
CATEGORIES:Adults
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/03/Copy-of-Pocket-Paintings-Spring-2025.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250510T103000
DTEND;TZID=America/Chicago:20250510T120000
DTSTAMP:20260503T042748
CREATED:20250428T223314Z
LAST-MODIFIED:20250428T223314Z
UID:10000894-1746873000-1746878400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-18/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250513T180000
DTEND;TZID=America/Chicago:20250513T190000
DTSTAMP:20260503T042748
CREATED:20250312T163112Z
LAST-MODIFIED:20250312T163112Z
UID:10000814-1747159200-1747162800@www.hutchpl.org
SUMMARY:For the Record - Books + Music Club
DESCRIPTION:For the Record is a place for music lovers to gather and share their love of both reading about and listening to music. Join us for a monthly meetup on the second Tuesday of the month at 6:00PM. We dive into the stories behind iconic musicians and albums\, while sharing our favorite tracks and newest record finds. We read the 33 1/3 series. These are short books\, each about a different musician and album. We explore a new one each month with a discussion about the book\, album and the music that moves us. Whether you are a vinyl enthusiast or just passionate about discovering new sounds\, For the Record offers a fun and welcoming space to connect. \n  \nWe meet every month except for September. \nVisit our Adults page to see what we are reading this month.  Books are available for check out at the Public Service desk.
URL:https://www.hutchpl.org/event/for-the-record-books-music-club-24/2025-05-13/
LOCATION:KS
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/For-the-Record-Event-Cover-Instagram-Post-xvgJYu.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250515T180000
DTEND;TZID=America/Chicago:20250515T193000
DTSTAMP:20260503T042748
CREATED:20250428T223553Z
LAST-MODIFIED:20250428T223553Z
UID:10000895-1747332000-1747337400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-19/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250521T180000
DTEND;TZID=UTC:20250521T190000
DTSTAMP:20260503T042748
CREATED:20250108T224828Z
LAST-MODIFIED:20250108T224828Z
UID:10000056-1747850400-1747854000@www.hutchpl.org
SUMMARY:Salt City Readers
DESCRIPTION:Let’s talk about books! We explore a variety of fiction genres each month! \nSalt City Readers meets every third Wednesday each month. \nCheck out the books at the Public Service Desk or on Cloud Library!  
URL:https://www.hutchpl.org/event/salt-city-readers-5/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Salt-City-Readers-Instagram-Post-vmKnTx.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250522T180000
DTEND;TZID=America/Chicago:20250522T190000
DTSTAMP:20260503T042748
CREATED:20250312T160743Z
LAST-MODIFIED:20250312T160743Z
UID:10000809-1747936800-1747940400@www.hutchpl.org
SUMMARY:Strange New Words - Sci-fi/Fantasy Book Club
DESCRIPTION:Strange New Words will take you on a literary journey through time and space with friends! This book club meets at the library every other month on the fourth Thursday at 6:00PM. Together\, we’ll explore new and thought-provoking realms that shed light on the complexities of the human experience—often through unexpected perspectives. Whether you’re a seasoned sci-fi enthusiast or just beginning to explore the genre\, Strange New Words offers a welcoming space for rich discussion\, discovery\, and connection. Join us as we navigate the unknown and unravel stories that challenge\, entertain\, and inspire.
URL:https://www.hutchpl.org/event/strange-new-words-sci-fi-fantasy-book-club/2025-05-22/
LOCATION:KS
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Strange-New-Words-20251-W7fngX.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250523T160000
DTEND;TZID=America/Chicago:20250523T173000
DTSTAMP:20260503T042748
CREATED:20250428T223723Z
LAST-MODIFIED:20250428T223723Z
UID:10000896-1748016000-1748021400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-20/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20250527T180000
DTEND;TZID=UTC:20250527T190000
DTSTAMP:20260503T042748
CREATED:20250108T224837Z
LAST-MODIFIED:20250108T224837Z
UID:10000058-1748368800-1748372400@www.hutchpl.org
SUMMARY:Mystery Mavens
DESCRIPTION:6:00 pm\nConference Room #2\nMystery Mavens meet on the fourth Tuesday of every month. If you are interested in obtaining a copy of this month’s book and participating in a discussion\, please contact Steve Westfahl (steve.w@hutchpl.org) or call 620-663-5441.
URL:https://www.hutchpl.org/event/mystery-mavens-5/
LOCATION:Hutchinson Public Library\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/Mystery1-4-kEYPR4.tmp_.png
GEO:38.062854;-97.931871
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Hutchinson Public Library 901 N Main St Hutchinson KS 67501 United States;X-APPLE-RADIUS=500;X-TITLE=901 N Main St:geo:-97.931871,38.062854
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250529T180000
DTEND;TZID=America/Chicago:20250529T193000
DTSTAMP:20260503T042748
CREATED:20250428T223934Z
LAST-MODIFIED:20250428T223934Z
UID:10000897-1748541600-1748547000@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-21/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,Children's Activities,For Everyone,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250530T150000
DTEND;TZID=America/Chicago:20250530T170000
DTSTAMP:20260503T042748
CREATED:20250503T225130Z
LAST-MODIFIED:20250503T225130Z
UID:10000899-1748617200-1748624400@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-8/
LOCATION:KS
CATEGORIES:Adults,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250604T160000
DTEND;TZID=America/Chicago:20250604T173000
DTSTAMP:20260503T042748
CREATED:20250527T232212Z
LAST-MODIFIED:20250527T234055Z
UID:10000910-1749052800-1749058200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-22/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250607T103000
DTEND;TZID=America/Chicago:20250607T120000
DTSTAMP:20260503T042748
CREATED:20250530T004246Z
LAST-MODIFIED:20250530T004246Z
UID:10000955-1749292200-1749297600@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-26/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250610T180000
DTEND;TZID=America/Chicago:20250610T190000
DTSTAMP:20260503T042748
CREATED:20250312T163112Z
LAST-MODIFIED:20250312T163112Z
UID:10000815-1749578400-1749582000@www.hutchpl.org
SUMMARY:For the Record - Books + Music Club
DESCRIPTION:For the Record is a place for music lovers to gather and share their love of both reading about and listening to music. Join us for a monthly meetup on the second Tuesday of the month at 6:00PM. We dive into the stories behind iconic musicians and albums\, while sharing our favorite tracks and newest record finds. We read the 33 1/3 series. These are short books\, each about a different musician and album. We explore a new one each month with a discussion about the book\, album and the music that moves us. Whether you are a vinyl enthusiast or just passionate about discovering new sounds\, For the Record offers a fun and welcoming space to connect. \n  \nWe meet every month except for September. \nVisit our Adults page to see what we are reading this month.  Books are available for check out at the Public Service desk.
URL:https://www.hutchpl.org/event/for-the-record-books-music-club-24/2025-06-10/
LOCATION:KS
CATEGORIES:Adults,Book Discussion
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/For-the-Record-Event-Cover-Instagram-Post-xvgJYu.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250611T171500
DTEND;TZID=America/Chicago:20250611T193000
DTSTAMP:20260503T042748
CREATED:20250523T203210Z
LAST-MODIFIED:20250523T203515Z
UID:10000908-1749662100-1749670200@www.hutchpl.org
SUMMARY:At Eternity's Gate - Movie Night
DESCRIPTION:Starring Willem Dafoe\, At Eternity’s Gate is a journey inside the world and mind of Vincent van Gogh who\, despite skepticism\, ridicule and illness\, created some of the world’s most beloved and stunning works of art.  \n  \nThe movie starts at 5:15PM in Meeting Room 1 and is open to the public. Grab some popcorn and something to drink before you settle in to watch!
URL:https://www.hutchpl.org/event/at-eternitys-gate-movie-night/
LOCATION:KS
CATEGORIES:Adults
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/05/At-Eternitys-Gate-Square-for-Website.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250612T163000
DTEND;TZID=America/Chicago:20250612T180000
DTSTAMP:20260503T042748
CREATED:20250530T004441Z
LAST-MODIFIED:20250530T004441Z
UID:10000956-1749745800-1749751200@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-27/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250613T150000
DTEND;TZID=America/Chicago:20250613T170000
DTSTAMP:20260503T042748
CREATED:20250530T220310Z
LAST-MODIFIED:20250530T220342Z
UID:10000959-1749826800-1749834000@www.hutchpl.org
SUMMARY:Creative Writing Corner
DESCRIPTION:The Creative Writing Corner is a space for anyone to sit down and work on their own stories. Whether you want to brainstorm ideas with other patrons\, need help editing your work\, or just want to sit in the corner and write away; this is the corner for you! Join us in Conference Room #1.
URL:https://www.hutchpl.org/event/creative-writing-corner-9/
LOCATION:KS
CATEGORIES:Adults,Makerspace,Young Adult
ATTACH;FMTTYPE=image/png:https://www.hutchpl.org/wp-content/uploads/2025/01/CWC-Logo-1-VV5gNw.tmp_.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250614T103000
DTEND;TZID=America/Chicago:20250614T120000
DTSTAMP:20260503T042748
CREATED:20250527T232517Z
LAST-MODIFIED:20250527T234118Z
UID:10000911-1749897000-1749902400@www.hutchpl.org
SUMMARY:3D Printing Certification
DESCRIPTION:We will soon require training to use our 3D printing services. This introductory workshop covers basic information to perform 3D printing projects. Completing it gives you access to use our 3D printing equipment\, and you will make a small 3D print at no cost. \n\n\n\n\n\n\n\n\nYou will need\n\n\n\n\n\n\nA current Hutchinson Public Library Card that belongs to you. You must bring this to the workshop.\nBasic computer and reading skills.\nA second visit to pick up your completed 3D print\n\n\nPlease remember:\n\nThere is no cost to attend.\nThere is not an age limit\, but you should be able to understand and follow written and verbal instructions\, as well as use a desktop computer.\nNo previous experience is required.\nSeats are limited\, but this workshop will be offered regularly. If you can’t attend a scheduled workshop\, please contact us to discuss alternatives.\nThe Makerspace will be closed to other activities during this workshop.\n\n \nAre you new to Makerspace? Haven’t attended orientation? Come to the Makerspace 30 minutes before the 3D Printing workshop for our Makerspace Orientation! You’ll learn what Makerspace is all about\, become familiar with our policies and services\, and meet fellow makers and creatives. This event will become the introduction for everyone using the library makerspace\, and may eventually be required. Get ready early by attending now! \n\nThere is no cost to attend\, but please bring your library card!\nThere is no age limit.\nRegistration is not required.\nThere is not a limit on attendance.\nThe Makerspace will be open during this workshop for non-disruptive projects.\nYou don’t need to attend the 3D Printing workshop to come to the orientation.
URL:https://www.hutchpl.org/event/3d-printing-certification-23/
LOCATION:Hutchinson Public Library – Makerspace\, 901 N Main St\, Hutchinson\, KS\, 67501\, United States
CATEGORIES:Adults,For Everyone,Makerspace,Young Adult
ATTACH;FMTTYPE=image/jpeg:https://www.hutchpl.org/wp-content/uploads/2025/03/3D-Printing-workshops-April-2025.jpg
END:VEVENT
END:VCALENDAR